1. RIB Profile is economical profile, it provides asthetic look to the buildings.
   
   
2. Pitch 250 mm C/C, crest height 30 mm, supply width 1060 mm & covered width 1020 mm and length up to 12 meters.
   
   
3. Available in Pre painted Galvanised steel, Bare Galvalume steel & Colour Coated Galvalume steel.
   
   
4. Available in thickness of 0.47 MM,0.50 MM,0.55 MM & 0.60 MM(All thickness are TCT(Total Coated Thickness)
   
   
5. Recommended Roof pitch 3` (1 in 20 or 5 %)
   

1. Clad profile(Model-1) is strongest profile, it provides aesthetic look to the buildings.
   
   
2. Pitch 250 mm C/C, crest height 30 mm, supply width 1060 mm & covered width 1020 mm and length up to 12 meters.
   
   
3. Available in Pre painted Galvanised steel, Bare Galvalume steel & Colour Coated Galvalume steel.
   
   
4. Available in thickness of 0.47 MM,0.50 MM,0.55 MM & 0.60 (All thickness are TCT(Total Coated Thickness)
   
   
5. Recommended Roof pitch 3` (1 in 20 or 5 %)
   

1. Provides asthetic look to the buildings
   
   
2. Available in thickness of 0.40 mm ,0.45 mm,0.50 mm .0.55 mm & 0.60 mm
   
   
3. Available in colours like Sico Red, Brick Red, Caulified Green ETC.
   
   
4. Top of the sheet is covered with guard film for safe TCT(Total Coated Thickness)
   transportation and handling.
   
   
5. Available in Pre Painted G.I & Colour Coated Galvalume.
   

Steel Deck can be used as a composite Floor System. the fast & simple installation of this high strength product gives immediate access to a working platform. Used in a composite design, Steel Deck performs as a positive reinforcement and a permanent form support, providing savings in concrete and reinforcement steel.

Material

Steel Deck is produced from galvanized and color coated galvanized steel produced as per IS:513, IS:277, IS:14246, and AS:1397-G300-Z275.Thickness of the deck can be 0.8mm, 1mm, or 1.2mm.

Stainless Steel Roof Ventilator

Model             : 300/500/600

Materials       : Adopting high quality Stainless steel & Aluminium, sealed bearing,                         fireproofing reinforced, nylon support or metal support and rivet to                         connect

Benefits        : Weather resistance and strong fray resistance, fine non-viscidity and self
                        cleanness, High revolving sensitivity and high air venting efficiency.

Working Conditions : Temperature difference between indoor and outdoor is 0.45C. It                                    begins to revolve at the wind speed of 0.20 m/s.

Roofing Angle : Applied in different roof in the scope of 0-22.5 oblique angle.

Applicable scope : Industrial workshop, commercial and civil building.

1. Polycarbonate Sheets :
   
   We provide Polycarbonate sheet for natural light in matching profiles of metal roof sheets. Polycarbonate sheets are UV coated which increase life span of sheet, Its available in clear & embossed form which protect the worker from direct sunlight, it also provide equal distribution of light
   
   
2. FRP sheets
   
   FRP Sheets are available in matching profiles of metal roof sheets.
   
   Thickness available from 2mm to 4mm
   
   Recommended area 5 to 8% of total roof area.
   
   

1. Saving in steel up to 40%
   
   
2. Saving in construction cost up to 30%
   
   
3. Light Weight reduces handling and transportation cost.
   
   
4. Saving in construction time
   
   
5. Close tolerances on sectional dimensions due to process of cold roll forming.
   
   
6. Economy due to reduction in dead weight on the main frame structure.
   
   
7. Ability to span long lengths.
   
   
8. Fast to erect and easy handling.
   
   
9. Assured dimensions and straightness.
   
   
10. No site drilling/cutting required.
    
    
11. Tailor made section lengths lead to no wastage and speedy erection.
    
    
12. Also available in G.I
    

1. Clip Lock profile is a screw less profile which is fixed with clip
   
   
2. Clip installation system means that no fasteners penetrate the profile
   
   
3. Pitch 215 mm , crest height 41 mm, supply width 430 mm lenght as per requirement upto 12 mts.
   
   
4. Available in Pre painted Galvanised steel, Bare Galvalume steel & Colour Coated Galvalume steel.
   
   
5. RAvailable in thickness 0.47, 0.50, 0.55 & 0.60mm